Geoclean 100 specifically designed to remove metal hydroxides, calcium carbonate and other scales from membrane-based water treatment units such as reverse osmosis (RO), nanofiltration (NF) and ultrafiltration (UF).
- Low foaming liquid cleaner
- Phosphate free cleaner, hence no impact on environment.
- Surfactant free cleaner.
- Effectively remove carbonates and metal oxides.
- Ideal for elevated temperature.
- Suitable for use with other Geoclean products.
Features:
It depends upon the severity of the membrane fouling. Generally, 8 – 10% wt. /wt. solution is recommended
| Low pH proprietary blend to dissolve scale & foulants and to keep membrane efficiency. |
| Compatible with sea water and polyamide membranes. |
| Easy to handle. |
| Completely soluble in water. |
| Compatible with ambient temperature also. |
| Use potable water that is free from chlorine and other oxidizing agents to prepare the cleaning solution. |
| Through mix by using mixer or by manual with rod. |
| The solution may be heated as per the severity of the fouling and the temperature must not exceed the membrane manufacturer’s limit. |
| In case of heavy fouling, drain the return flow (upto 20% of CIP tank volume) to the cleaning tank to prevent redisposition. |
Geopure 100 is formulated to be injected neat. However, if dilution is required, use deionized water or RO permeate. If neither of these is available, softened water may be substituted. The dilution for Geopure 100 should not result in a solution strength of less than 10%. This guideline will protect the effectiveness of the internal bacteriostat, which inhibits bacterial growth in the product packaging and feed tank.
Technical Support (Sales Backup) is available for chemicals selection, dosing, startup assistance, CIP supervision. Troubleshooting and all technical guidance.