Advanced Low pH Membrane Cleaner
for Stubborn Fouling
Geoclean 110 is a next-generation, low pH membrane cleaner engineered to tackle the toughest scaling and metallic foulants in RO and UF systems. Designed for industrial plants facing persistent drop in permeate flow, rising differential pressure, and reduced salt rejection—this cleaner goes deep, dissolving complex scales and restoring performance with surgical precision. Whether you're maintaining critical utilities in power, pharma, or process industries, Geoclean 110 delivers a high-impact clean while being membrane-safe. It's more than just a cleaner—it's membrane revival on demand.
- Low foaming liquid cleaner
- Phosphate free cleaner, hence no impact on environment.
- Surfactant free cleaner.
- Effectively remove carbonates and metal oxides.
- Ideal for elevated temperature.
- Suitable for use with other Geoclean products.
Features:
- Breaks Down the Toughest Scales: Penetrates and dissolves hard-to-remove deposits like iron, calcium, and mixed metallic fouling.
- Fast-Acting with Deep Cleaning Action: Begins acting within minutes to restore flow rates and improve overall system recovery.
- Corrosion Inhibition Built-In: Offers dual protection—aggressive on foulants, gentle on system metallurgy.
- Enhanced Wetting and Detergency: Superior cleaning reach into membrane pores, helping dislodge deeply embedded particles.
- Stable, Low Foaming Profile: Ideal for CIP operations in high-flow, multi-stage systems.
- AI-Compatible Monitoring Ready: Optimized for IoT-based monitoring and smart cleaning schedules.
It depends upon the severity of the membrane fouling. Generally, 8 – 10% wt. /wt. solution is recommended
| A specialized blend of proprietary buffers and other components to dissolve organic foulants and disperse colloidal particles. |
| Compatible with sea water and polyamide membranes. |
| Easy to handle. |
| Completely soluble in water. |
| The solution must be discarded if it becomes turbid (increase in SDI) or discolored by removal deposits to avoid redisposition. |
| Monitor the pH of the solution during the cleaning process. If the pH remains in the desired range and the solution is not turbid, it may be used to clean subsequent stages. In the unlikely event that the pH falls, prepare a new batch and repeat steps. |
Geopure 100 is formulated to be injected neat. However, if dilution is required, use deionized water or RO permeate. If neither of these is available, softened water may be substituted. The dilution for Geopure 100 should not result in a solution strength of less than 10%. This guideline will protect the effectiveness of the internal bacteriostat, which inhibits bacterial growth in the product packaging and feed tank.
Technical Support (Sales Backup) is available for chemicals selection, dosing, startup assistance, CIP supervision. Troubleshooting and all technical guidance.