Plate Type Exchanger
(Closed Circulation Side)
Geoclean 250 is a precision-formulated descaling solution
engineered for plate-type heat exchangers in closed-loop
circulation systems. It effectively dissolves corrosion
debris, organic fouling, and performance-reducing deposits
that accumulate in closed circuits over time. Designed for
targeted action without harming sensitive materials,
Geoclean 250 helps extend equipment life, optimize heat
transfer, and restore system efficiency—fast.
Ideal for chilled water loops, process water systems, and
HVAC applications, this formula works where others
fail—penetrating narrow channels and removing internal
buildup without disrupting your system integrity.
- Formulated for Closed-Loop Systems: Designed specifically for plate heat exchangers operating in sealed circulation loops—targeting common fouling unique to these systems.
- Removes Corrosion Residues & Organic Sludge: Breaks down fine rust particles, biofilm, and accumulated contaminants that reduce system flow and thermal performance.
- Safe on Compatible Metals: Non-aggressive toward most plate materials, helping preserve mechanical integrity during routine maintenance or corrective cleaning.
- Low-Foaming, Easy to Flush: Ensures visibility and ease during cleaning cycles with minimal foaming and effortless rinsing post-application.
- Restores Heat Exchange Efficiency: Eliminates insulating layers and flow restrictions to help reduce energy consumption and improve system response time.
- Minimal Downtime, Maximum Results: Fast-acting formulation reduces system shutdown duration—keeping operations on track and maintenance hassle-free.
- IIdeal for Periodic Maintenance: Use Geoclean 250 as part of your planned service program to prevent long-term fouling, corrosion blockages, and heat loss.
- Inhibited Descaling Agent – preventive bare metal corrosion
- Powerful wetting and spreading property with penetrating agents, hence rapidly removes Scale and Deposit
- Biodegradable and will not harm the environment (ecofriendly)
- Easy to use and cost effective
Geoclean 2315 can be applied through various methods, depending on the equipment and scale buildup severity:
- Chemical Circulation: In closed-loop systems like condenser or heat exchanger units, Geoclean 2315 are often circulated through the equipment. This method is highly effective at removing scale, as the chemical solution continuously interacts with the deposits
- Immersion Soak: For smaller components or parts, immersion soaking in a diluted Geoclean 2315 solution can be used. This method allows the chemical to penetrate and dissolve the scale.
- Manual Brushing: In cases where scale buildup is severe or inaccessible, manual brushing with Geoclean 2315 solution may be necessary to physically remove the deposits.
Geoclean 2315 can be used at strengths between 10 and 25% and at temperatures up to 80°C, the speed of reaction being enhanced by acid strength and elevated temperature.
When the acid is approaching exhaustion the color of the solution will change from red to yellow and this indicates that more Geopure 1030 should be added.
After completion of descaling equipment should be drained and flushed thoroughly and any acid effluent neutralized.
NOTE - Geoclean 2315 should NOT be used on stainless steel, aluminum or galvanized surfaces.
Geopure 100 is formulated to be injected neat. However, if dilution is required, use deionized water or RO permeate. If neither of these is available, softened water may be substituted. The dilution for Geopure 100 should not result in a solution strength of less than 10%. This guideline will protect the effectiveness of the internal bacteriostat, which inhibits bacterial growth in the product packaging and feed tank.
Technical Support (Sales Backup) is available for chemicals selection, dosing, startup assistance, CIP supervision. Troubleshooting and all technical guidance.