Bio-Dispersant for Cooling Water Treatment
Geopure® 7800 is a high-performance bio-dispersant
specifically engineered for cooling water systems
operating under high organic load or grey/recycled water
make-up conditions. Such waters often carry elevated
levels of organic contaminants and microbial populations
that accelerate slime formation, biofouling, and
under-deposit corrosion.
Geopure® 7800 provides a dual-action benefit by dispersing
biofilms and organic deposits while enhancing the
penetration and efficacy of biocides. It ensures cleaner
heat exchange surfaces, reduced microbiological risks, and
improved overall system efficiency. This makes it an ideal
solution for industries adopting water reuse practices or
dealing with stressed water sources.
- Type:Liquid
- Appearance:Light Yellow
- Odour:Characteristic
- Solubility in water:Complete
- Specific Gravity @ 25ºC:1.01 ± 0.05
- pH(10% Solution):Alkaline
Physical Properties:
- Biofilm Penetration & Dispersancy: Breaks down and disperses existing biofilms for easier microbial control.
- Enhanced Biocide Synergy: Boosts the effectiveness of oxidizing and non-oxidizing biocides.
- Grey/Recycle Water Compatible: Optimized for systems using grey water, treated effluent, or other high-organic make-ups.
- Deposit Control: Prevents accumulation of organic matter, microbial slimes, and suspended deposits.
- Corrosion Protection Support: Reduces under-deposit corrosion by eliminating organic fouling layers.
- Improved Heat Transfer Efficiency: Keeps system surfaces clean for better thermal performance and energy savings.
- Flexible Application: Suitable for continuous or slug dosing in industrial cooling towers, HVAC systems, and high-load process cooling circuits.
Recommended dosage of Geopure 7800 is 5 – 10 mg/L on makeup.
| Proper human safety products such as Splash goggles, lab coat, vapour respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details. . |